Cleaning a Keen’s Buildings Steel Building Made Easy
Now that you’ve got your Keen’s Buildings Steel Building, durable storage structure built you will want to keep it clean and organized. Taking a few hours and a little sunshine to maintain the appearance of your building is key for keeping mold, mildew, and stains your steel building. These helpful guide lines should offer some ways to tackle the task.
With A Mixture of Dish soap and Water: Get a bucket with a tablespoon of mild dish soap. Keep in mind that for every five gallons of water used, you only need a few teaspoons of soap. Next, take your garden hose to rinse the siding and outer structure thoroughly. Once you’ve loosened the dirt, on the outside, use a long handled scrub brush with soft bristles or oversized sponge. You don’t want to scratch the surface of our building with a harsh cleaning utensil. Work your way all around your structure and then rinse down the building with your garden hose
When Using A Power Washer: Power washers can have intensive water pressure settings which be more effective for removing dirt on the exterior of a Keens Steel Building. Power washers can be rented or purchased depending on how often you may use one. Most power washers come with attachments like long handled brushes with bristles that rotate. Often times these power washers come with cleaning solutions that help get rid of tough stains on the siding. Be sure to use a low setting on the power washer if you’ve chosen a vinyl or wooden structure. High-pressure blasts directly hitting nonsteel surfaces can be damaging.
Remove mildew with a Special Cleaner: Stubborn spots and stains can require a bit more than elbow grease. Try using a special cleaning solution with a tooth brush to concentrate on those tough stains. Rinse clean let dry then repeat the process. Many home improvement specialty stores carry cleaning solutions made for vinyl and wooden surfaces. While a Keens Steel building structure can withstand high-pressure blasts you want to be mindful not go overboard with certain chemicals in specialty cleaners. They can cause surface discoloration.
Use a Water and Vinegar Solution: A-70% water 30% vinegar combination is the right ratio for this solution. Many environment concerned clients prefer to use all natural products. A vinegar based cleaning solutions is a green alternative that is rather effective. You want to wash down your building with the vinegar solution, let it sit for 30 minutes, rinse, repeat and dry.
Try a combination of laundry detergent and water: This is another cost-effective structure cleaning option. 1/3 cup detergent for every 6 gallons of water is the suggested proportion. If you are using a power washer you can use this mixture as your cleaning solution. Long handled sponge mops or scrubbing brushes will work up a good lather on your steel building. Rinse off the surface with a garden hose or power cleaner, repeat, and then let dry.
We suggest that you use caution when cleaning your steel building from Keen’s Buildings. If you have questions, please feel free to contact one of our sales specialist in an office near you – http://keensbuildings.com/choose-your-keens-location/.